Sealant for automatic transmission fluid. 85 g. It is resistant to aging, erosion, thermal cyclic loads without hardening, shrinking, or cracking. Improved resistance to oil, good stickiness, and preservation of flexibility. It is safe for sensors. It is not recommended for use in the units, which have direct contact with gasoline. Application: Clean and dry the surfaces. Cut off the end piece of the applicator to get the hole of the necessary diameter from 2 to 6 mm. Apply it on one surface in an even continuous layer, looping around the bolt holes. Assemble the parts and remove an excessive amount before the product dries up. It dries up within one hour. The complete drying: in 24 hours.