Sealant for repair of mufflers and exhaust pipes. 85 g. Non-shrinking, thick, paste-like repair composition. It reliably seals holes and leakages in the exhaust gas discharge system. It reinforces new installation units. It sustains heating up to +1100°C. It is used for repair and sealing of exhaust system parts. Application: Clean the surface from dirt, oil, and rust. Wet the sealed place with water and apply the composition. Let it dry for 30 minutes, then start the engine and wait for more 10 minutes. The complete polymerization is in 24 hours and at the maximum temperature of engine operation.