Thread locker, removable (blue). Universal locker for fastening parts with the diameter more than 6 mm. It creates strong elastic joints, which do not loose their properties within some time. It can be removed. It seals the joint and provides it with resistance to vibrations. It is resistant to most chemical substances. It is easily removed with manual tools. It dries up during 20 - 30 minutes on most metal surfaces. The complete hardening is during 24 hours. The temperature mode: -59°C to +149°C. Shear strength: 1600 psi. It seals hydraulic and pneumatic valves, bolts of the valve cover, bolts of the crankcase pan, and any places where spring split washers (Grower washers). Application: Clean and dry up parts. Thoroughly shake the bottle. Remove the cap and cut the tip. Apply several drops on the fastener surface. Assemble and screw as usual. Shake before application.