Sealant for manual gearboxes. 85 g. It is specially developed with increased resistance to anti-seize additives, contained in transmission, differential and transfer case oils. It ensures reliable sealing. It is not recommended for use in the units, which have direct contact with gasoline. Application: Clean and dry the surfaces. Cut off the end piece of the applicator to get the hole of the necessary diameter from 2 to 6 mm. Apply it on one surface in an even continuous layer, looping around the bolt holes. Assemble the parts and remove an excessive amount before the product dries up. It dries up during one hour. The complete drying: in 24 hours.