It is the most modern and advanced development in this sphere. It complies with OEM standards. It quickly forms tight gaskets. It sustains short-term heating up to 700°F (371°C). It is used for gaskets of turbochargers, gearboxes, crankcase pan, exhaust manifolds, thermostats, compressors, pumps, etc. It has low volatility at hardening. It is safe for oxygen sensors. It is not destroyed by oils, water, anti-freeze, power steering fluids. APPLICATION. 1. Remove residues of the old gasket and clean the surface carefully, without scratches on the metal, remove dirt, fat, and oil. 2. Holds the bottle at 45-degree angle and apply the gasket sealant on the whole contact surface, thus making a layer of 2 - 3 mm of thickness. 3. Let it dry up for 10 minutes before the installation. 4. Press both jointed parts by screwing the bolts. 5. Remove excess of the sealant with a dry wipe.