Highway atomic metal conditioner with a revitalizant. It is specially used for engine protection at high-speed and loaded operating modes. The innovative 3-component* product of the new generation combines benefits of a two-phase complex metal conditioner and a 3-generation revitalizant. Benefits. It compensates the current engine wear; evens compression in cylinders; increases pressure in the oil system to the nominal value; forms the active protection systems for parts against loads and overheating; improves lubricating properties of oils and tribological properties of engine units; increases engine power and acceleration; reduces noises and vibration; extends the engine service life. Application. The product temperature before application must be minimum +25°C. Shake the bottle. Pour the product into the oil filler of the engine warmed up to the operating temperature. Start the engine and ensure its idle run within 3 - 5 minutes. Remarks. A metal conditioner with a revitalizant is efficient for gasoline, LPG and diesel engines of passenger cars and light-duty trucks with the oil system volume from 3 to 5 liters. It is compatible with all types of motor oils. It is recommended at each oil change. It is recommended to use AMC Maximum (RF 100) for complete revitalization. The product comprises a revitalizant in granules which is fully diluted in oil at the operating temperature.