It is used for local and accurate setting (tuning) of rubbing parts of the engine to ensure minimum friction losses and maximum service life. The innovative 3-component* product of the new generation combines benefits of a two-phase complex metal conditioner and a 3-generation revitalizant. Benefits. It evens compression in cylinders; increases pressure in the oil system to the nominal value; forms the active protection systems for parts against loads and overheating; improves lubricating properties of oils and tribological properties of engine units; reduces noises and vibration; extends the engine service life; reduces fuel consumption; increases engine power and acceleration. Application. The product temperature before application must be minimum +25°C. Shake the bottle. Pour the product into the oil filler of the engine warmed up to the operating temperature. Start the engine and ensure its idle run within 3 - 5 minutes. Remarks. A metal conditioner with a revitalizant is efficient for gasoline, LPG and diesel engines of passenger cars and light-duty trucks with the oil system volume from 3 to 5 liters. It is compatible with all types of motor oils. It is recommended to be used in turbocharged and high-power engines at each oil change. It is recommended to use AMC Maximum (RF 100) for complete revitalization. The product comprises a revitalizant in granules which is fully diluted in oil at the operating temperature.